Iwaki Air's 3/8" TC-X 100/101 Series pump is great for drum unloading where frequent start/stop actions are required. Available in a metallic or non-metallic body with endless diaphragm possibilities, this series drops into the Yamada DP-10 footprint.

Traditional process stream carbon adsorption has utilized relatively large loose carbon granules. The carbon granules are typically held within replaceable filter canisters.

Valin provides quality motor products designed to perform in environments and applications where ordinary motors are unsuitable.

Actril? Cold Sterilant Demonstrate Complete Inactivation of 229E Human Coronavirus Strain in 5 Minutes!

Concerned about COVID-19 Coronavirus? Cantel recently had a third-party laboratory verify the efficacy of its Actril? and Minncare? Cold Sterilant on hard, non-porous surfaces. The test demonstrated a complete inactivation of the 229E human coronavirus strain in 5 minutes.

Frameless motors are the ideal solution for machine designs that require high performance in small spaces. Kit motors allow for direct integration with a mechanical transmission device, eliminating parts that add size and complexity. Learn more.

Parker's Electromechanical & Drives Division North America is pleased to announce the release of our P Series Express Motor options for the OSPE product line. These options provide convenient, configurable standard product offerings to include our P Series servo motors factory installed. Learn more.

Incorporating a gearhead into your application vs. a servo motor alone can offer several advantages related to performance and cost.

Parker's competitively priced FR Series ultra high purity regulators are perfect for controlling process gases in downstream point-of-use applications in semiconductor fabrication.

Please join us February 11 - 13 in Anaheim, CA for the Automation Technology Tradeshow, ATX West. Valin will be exhibiting at the show where you will get to see the latest technology.

Compressed air contamination problems can be simply avoided by installing a Parker Zander OFAS HL Oil Free Air System fitted (including OIL-X filtration). The fully integrated heatless compressed air dryer and filtration packages are suitable for use with any compressor type. Learn more.

Parker's Electromechanical & Drives Division is pleased to announce the release of the ACR7000 series controllers. The new ACR7000 series combines performance, value, and scalability that exceeds OEM expectations.

Patlite LR6 Series Signal Tower Lights are the next generation signal tower series featuring ultra-bright LEDs, a modular design, and a wide-selection of options to take on the most challenging applications.

Incorporating stainless steel sensor technology into ECHOLINE^?'s LDP Series product family results in a low-pressure monitor capable of operating with corrosive media while monitoring low pressures.

There is no "one size fits all" drive train linear actuator technology for every application. In reality, the selection of different types of linear motion systems depends entirely on what is most critical to a specific application.

The iPolymer Sub-miniature Solenoid Valves, offered in 2-Way NC, 2-Way NO, and 3-Way designs, perform under extreme conditions and are ideally suited for semiconductor, pharmaceutical, bio-medical, and chemical process applications.

Oriental Motor's AlphaStep closed-loop control systems perform accurate positioning operations with ease. The AlphaStep features a unique control system combining the benefits of "open loop control" and "closed loop control".

Replacing standard alloy fittings on a pressure gauge with gall resistant fittings is a minor change, but doing so eliminates the major issues associated with standard fittings. Fittings in a gall resistant material ensure a leak-tight seal, prevent particulate contamination from silver flaking, and minimize damage to the equipment caused by cross-threaded and/or seized fittings.

WIKA's mini diaphragm gauge was developed for high-purity applications with limited space requirements, such as smaller integrated gas sticks and gas box assemblies. The nominal sizes of 1" and 1.3" are ideal for applications involving gaseous, liquid, and corrosive media up to 160 psi.

High-purity metering pumps are provided for on-tool chemical generation and chemical concentration management. As the leader in surface preparation recirculation pumps, Iwaki's high-purity pumps are the choice for CMP, etch/strip, and copper solution handling.

Vibration and noise control for stepper motors have been a focus of machine builders in recent years. Too much vibration can cause missed steps, and minimization of noise can widen applications outside of factory automation. The good news is that recent advances in driver technology can help.

It can be challenging for OEMs, system integrators, and distributors to find invisible noise. Unwanted EMI and RFI noise can degrade the performance of communication systems and cause false triggering and faulty readings in sensor circuits.

EMI and RFI are types of electric or electronic emission that can degrade, impair, or prevent electrical circuit performance. To protect and optimize equipment performance, Enerdoor offers one of the largest ranges of solutions to reduce electromagnetic/radio-frequency interference.

The Parker P Series servo system combines compact, flexible, advanced functionality drives with high-performance motors for a superior servo system, providing unique value to machine builders.