The battery-powered signal converter is the reporting, input and output control device for the electromagnetic flow meters. It is available as meter mount or remote mount.
The converter allows the measurements, functional programming, control of the sensor and data recording to be communicated through the display and inputs & outputs.
The microprocessor-based signal converter has a multi-point curve-fitting algorithm to improve accuracy and a rugged enclosure that meets IP67.
The microprocessor continually monitors the converters functionality. The converter will output rate of flow and total volume.
The converter also comes many more features that is fully user-configurable using the configuration tool via the USB port and a laptop computer.
ProComm GO Signal Converter Specifications:
| Altitude: | Operating: 2000 m Storage: 12,000 m |
| Analog Outputs: | 4 - 20 mA: Galvanically Isolated, 16 Bit resolution. All power configurations (including battery). Note: 9-30 VDC loop power required (not supplied via converter) |
| Connection Options: | Optional shielded cable for 10 - 32 VDC/4-20 mA output Optional shielded cable for pulse out |
| Data Logger: | Standard with all models, minimum of five years of data stored |
| Display: |
|
| Electrical Certifications: | IEC 61010-1, Pollution Degree II Overvoltage protection Category III |
| Housing Details: | Diecast aluminum, powder coated enclosure w/ tamper resistant seal, 6 x 6 x 43/8 tall |
| Indoor/Outdoor: | IP67 Die cast aluminum converter |
| Operating Temperature Range: | 4° to 140° F (-20° to 60° C) |
| Options: | Data Logger - included as standard with five years of data storage at default (12 hr) interval. (Cable sold separately) AC, DC, and battery powered with battery backup powered available |
| Outputs: | Digital output:
|
| Power: | Battery: Standard: three 3.6V lithium-thionyl chloride (Li-SOCI2) D size batteries with two AA backup batteries AC Power: 100 - 240 VAC/45-66Hz (4W) DC Power: Linear power supply 10 - 35VDC (4 W) |
| Relative Humidity: | 0% to 100% |
| Standard Storage Temperature: | -4° to 140° F (-20° to 60° C) |
Download McCrometer ProComm Converter Series Comparison Chart
Contact us at (855) 737-4714 to learn more, or fill out our online form.
Battery-powered signal converter is the reporting, input and output control device for the electromagnetic flow meters.