Advanced Stem Seal System with Superior Design for Better Performance

Parkers patented Pressure-Core Stem Seal System was tested by an independent laboratory in accordance with EPA Method 21, and the results indicate that the Pressure-Core Stem Seal is a reliable, affordable, virtually leak-free bonnet requiring no costly, time-consuming maintenance.

After years of field experience and millions of valves in service, Parker takes great pride in extending a five-year limited warranty on our Pressure-Core Stem Seal, far exceeding the industry standard.
 

Parker Pressure-Core Seal Features:

• Virtually Leak-Free Performance
• No Adjustments or Maintenance Requirements
• Unmatched 5 Year Warranty
• No Fugitive Emissions

How They Do It!

The Pressure-Core Seal consists of an outer PTFE shell with an elliptical shaped FKM O-Ring core. The encapsulated core is live- loaded and provides constant outward pressure against the PTFE shell, which flexes under pressure like an O-Ring. The PTFE shell offers the desired chemical resistance without periodic gland tightening as in conventional designs.
 

Testing Proves It!

Compared to competitive bonnet designs, Parkers Pressure-Core Seal offers virtually leak-free performance with no maintenance requirements. To support this claim, the Pressure-Core Seal was tested against the competitor's design. The tests simulated harsh plant operating environments and were performed by an independent laboratory in accordance with EPA Method 21.

Test results indicate that the Pressure-Core Seal is a reliable, affordable, virtually leak-free bonnet requiring no costly, time consuming maintenance. Parker stands behind this claim with a five year warranty, far exceeding the industry standard.
 

Fugitive Emissions Test Results

See for yourself how Parker's Pressure-Core not only outperforms the competition, but sets a new industry standard...

Test Procedure

Valves mechanically cycled 50 times (full open to full close) at 1,000 PSI methane, then heated to 400F and air cooled to ambient. Procedure repeated until failure.

Failure Criteria

100 PPM leak
Competitions Emission Seal Warranty

TEST RESULTS

Parker: The Pressure-Core Seal successfully completed 694 mechanical cycles and 13 thermal cycles. Maximum leakage throughout testing was 40 PPM.

Competition: The competitions low emissions graphite design failed on the 89th mechanical cycle and on average every 125 cycles throughout the testing. Repeated maintenance was required between each failure to readjust the valve packing.


Download Parker Pressure-Core Seal Datasheet 

Call us today at (855) 737-4714 to learn more or fill out our online form and someone will get back to you.